Job Description
Job description
The successful Aircraft Mechanic-Avionics performs organizational, intermediate, and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components, and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed.
• Performs testing and troubleshooting of weapons systems, complex avionics/electrical systems and subsystems, communication/navigations, electronic flight control, fuel, power generators, power distribution systems, lighting systems, flight instrument and fuel systems, temperature and pressure indicating, engine and control indications, ATFLIR, Electronic Counter Measure, and RADAR systems.
• Provides technical assistance, guidance, and astute communication skills during aircrew de-brief.
• Reads and interprets blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals.
• This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities.
• May be required to lift objects whose weight normally will not exceed 70 pounds.
• Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.
• The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, snow, ice, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.
• May be required to perform off-site service on assigned detachments.
Minimum Qualifications:
• Minimum three years’ aircraft avionics maintenance experience.
• Must have experience in corrosion detection, treatment, and prevention. Personnel shall be qualified according to their field of expertise and the level of maintenance assigned.
• The successful Aircraft Mechanic-Avionics performs organizational, intermediate, and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components, and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed.
• Performs testing and troubleshooting of weapons systems, complex avionics/electrical systems and subsystems, communication/navigations, electronic flight control, fuel, power generators, power distribution systems, lighting systems, flight instrument and fuel systems, temperature and pressure indicating, engine and control indications, ATFLIR, Electronic Counter Measure, and RADAR systems.
• Provides technical assistance, guidance, and astute communication skills during aircrew de-brief.
• Reads and interprets blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals.
• This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities.
• May be required to lift objects whose weight normally will not exceed 70 pounds.
• Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.
• The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, snow, ice, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.
• May be required to perform off-site service on assigned detachments.
• Must have experience in corrosion detection, treatment, and prevention. Personnel shall be qualified according to their field of expertise and the level of maintenance assigned.
• Must be able to obtain/maintain any company/government required qualifications, certifications, licensing, or clearance.
• High School Diploma or equivalent.
• Must be able to work all assigned shifts & schedules.
• Must have a valid state driver's license.
Preferred Qualifications:
• Recent experience with F-18A-F, EA-18G, E-2C, or MH-60S F-16 aircraft preferred.
• Possess a high degree of expertise of aircraft systems, avionics theory and applications.
• Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.
• Must be familiar with operational capabilities and limitations of aircraft systems.
• Possess a thorough working knowledge of the detection, prevention, and treatment of corrosion.
• Working knowledge of aircraft sub-systems, including maintenance parameters, systems operations, limitations, and technical orders.
• May be required to troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, hydraulic, engines, auxiliary power unit, and ventilation and heating systems to ensure aircraft remains in safe operating conditions.
LICENSING, CERTIFICATION REQUIREMENTS:
• Formal/Specialized Training or Equivalent
• Hazardous Waste Communication Training
• FOD and TCP Awareness Trained
• Security Clearance Awareness Training
• COMNAVAIRFORINST 47+0.2 Program Awareness
• NALCOMIS/OOMA Trained preferred.
• ESD Trained
• Support Equipment Operator’s License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum.)
• Collateral Duty Inspector (in T/M/S aircraft)
• Egress System Checkout
• Plane Captain Qualified Preferred
• Aircraft Towing Certified Preferred
• Aircraft Brake Rider Certified
• Operational Risk Management (ORM) Training
• Fuel Surveillance Trained Preferred
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, ****** orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters.
The successful Aircraft Mechanic-Avionics performs organizational, intermediate, and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components, and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed.
• Performs testing and troubleshooting of weapons systems, complex avionics/electrical systems and subsystems, communication/navigations, electronic flight control, fuel, power generators, power distribution systems, lighting systems, flight instrument and fuel systems, temperature and pressure indicating, engine and control indications, ATFLIR, Electronic Counter Measure, and RADAR systems.
• Provides technical assistance, guidance, and astute communication skills during aircrew de-brief.
• Reads and interprets blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals.
• This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities.
• May be required to lift objects whose weight normally will not exceed 70 pounds.
• Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.
• The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, snow, ice, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.
• May be required to perform off-site service on assigned detachments.
Minimum Qualifications:
• Minimum three years’ aircraft avionics maintenance experience.
• Must have experience in corrosion detection, treatment, and prevention. Personnel shall be qualified according to their field of expertise and the level of maintenance assigned.
• The successful Aircraft Mechanic-Avionics performs organizational, intermediate, and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components, and equipment. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed.
• Performs testing and troubleshooting of weapons systems, complex avionics/electrical systems and subsystems, communication/navigations, electronic flight control, fuel, power generators, power distribution systems, lighting systems, flight instrument and fuel systems, temperature and pressure indicating, engine and control indications, ATFLIR, Electronic Counter Measure, and RADAR systems.
• Provides technical assistance, guidance, and astute communication skills during aircrew de-brief.
• Reads and interprets blueprints, technical directives, planning documents, test specifications, technical publications and procedures, and applicable safety manuals.
• This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities.
• May be required to lift objects whose weight normally will not exceed 70 pounds.
• Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.
• The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, snow, ice, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.
• May be required to perform off-site service on assigned detachments.
• Must have experience in corrosion detection, treatment, and prevention. Personnel shall be qualified according to their field of expertise and the level of maintenance assigned.
• Must be able to obtain/maintain any company/government required qualifications, certifications, licensing, or clearance.
• High School Diploma or equivalent.
• Must be able to work all assigned shifts & schedules.
• Must have a valid state driver's license.
Preferred Qualifications:
• Recent experience with F-18A-F, EA-18G, E-2C, or MH-60S F-16 aircraft preferred.
• Possess a high degree of expertise of aircraft systems, avionics theory and applications.
• Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.
• Must be familiar with operational capabilities and limitations of aircraft systems.
• Possess a thorough working knowledge of the detection, prevention, and treatment of corrosion.
• Working knowledge of aircraft sub-systems, including maintenance parameters, systems operations, limitations, and technical orders.
• May be required to troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, hydraulic, engines, auxiliary power unit, and ventilation and heating systems to ensure aircraft remains in safe operating conditions.
LICENSING, CERTIFICATION REQUIREMENTS:
• Formal/Specialized Training or Equivalent
• Hazardous Waste Communication Training
• FOD and TCP Awareness Trained
• Security Clearance Awareness Training
• COMNAVAIRFORINST 47+0.2 Program Awareness
• NALCOMIS/OOMA Trained preferred.
• ESD Trained
• Support Equipment Operator’s License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum.)
• Collateral Duty Inspector (in T/M/S aircraft)
• Egress System Checkout
• Plane Captain Qualified Preferred
• Aircraft Towing Certified Preferred
• Aircraft Brake Rider Certified
• Operational Risk Management (ORM) Training
• Fuel Surveillance Trained Preferred
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, ****** orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters.
💡 Quick Summary
Seeking a career-building opportunity? The Aircraft Mechanic Avionics (FW) - NAWDC GT position is now open for candidates interested in the Mechanic Jobs sector. This role in Fallon offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Mechanic Jobs is a plus.
