Engineering Support Staff Technician - Onsite

Qualifications
Associate degree with a minimum of 6 years relevant experience
Experience with Solder, mechanical, quality standards, processes, and/or documentation
Verification and inspection experience with associated standards, processes, and/or documentation
Experience with cable and harness assembly, fabrication, and/or rework
The ability to obtain and maintain a U.S. government issued security clearance is required
U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
CCA manufacturing experience and associated fabrication standards, processes, and documentation
IPC J-STD-001 solder certification
IPC 610 and 620 acceptability certification and inspection experience
Motivated self-starter with the ability to use good judgement and work independently or collaboratively
Ability to perform quality work within a fast-paced Engineering technical support environment
Solder rework equipment to include reflow oven, mini-wave, pre-heater, hot air pencil, and de-solder tools
Ability to work with fabrication processes such as bonding, cleaning, coating, and mechanical fasteners
Ability to read and comprehend work instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents
Ability to establish customer priorities and manage multiple tasks successfully
Must have experience using hand tools such as soldering iron, cutters, wire strippers, and electric heat gun
Assembly, fabrication, and rework experience of micro-size components on circuit card assemblies
Existing secret security clearance
Benefits
The salary range provided is a good faith estimate representative of all experience levels
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays
Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement
Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance
Responsibilities
A Lead Engineering Support Technician is responsible for the building, installing, troubleshooting, repairing, and inspecting Engineering circuit card assemblies, cable, and harness systems
Work includes Engineering prototyping, field service, and repair of returned materials
Candidates will be able to rework and modify Engineering micro-sized components on CCAs, prototype sub-assemblies, completed assemblies, cables, and harness systems per Engineering drawings, schematics, or work instructions
The successful candidate will demonstrate the skills and knowledge required to effectively and efficiently repair or replace defective Engineering micro-components and wiring to ensure installations meet Engineering conformity
This individual will demonstrate effective cable and harness repair techniques using acceptable practices including splicing, crimping, soldering, and pinning of wiring
The candidate will ensure that all work performed is properly and completely documented and ready for use
Verification and inspection may be required, and candidate will need to be able to identify and document findings per authorizing protocols
The candidate will also provide on-the-job recommendations in solving hardware integration issues with mid and upper-level Engineering and Leadership
The candidate will comply with the company’s FOD program, tool control program and all safety regulations
The candidate may perform duties at various company locations
Modify, rework, and populate Engineering CCA’s, assemblies, and subassemblies to ensure proper operation per established criteria
Perform required repairs to returned and damaged units to an operational state
Micro-soldering under a microscope for an extensive period
Build cables and harnesses from schematics
Quality verification and inspection under a microscope
Identify, repair, and replace wire harnesses and cable assemblies
Replace mechanical and electrical components
Operate multi-meters or basic ohmmeters to conduct point-to-point current connection
Recognize failures, isolate problems, and suggest appropriate corrective action
Keep management appraised of potential problems or identified risks that may negatively affect program schedule or quality
Provide support and feedback to the Engineering development team
Onsite: Employees who are working in Onsite roles will work primarily onsite
This includes all production and maintenance employees, as they are essential to the development of our products
Clearance Information: This position requires a security clearance
Job description
Date Posted:
2025-02-04

Country:
United States of America

Location:
AZ201: RMS AP Bldg 801 1151 East Hermans Road Building 801, Tucson, AZ, 85756 USA

Position Role Type:
Onsite

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Department Role

Our Effector Power and Analog Design department is looking for a Lead Engineering Support Technician. A Lead Engineering Support Technician is responsible for the building, installing, troubleshooting, repairing, and inspecting Engineering circuit card assemblies, cable, and harness systems. Work includes Engineering prototyping, field service, and repair of returned materials. Candidates will be able to rework and modify Engineering micro-sized components on CCAs, prototype sub-assemblies, completed assemblies, cables, and harness systems per Engineering drawings, schematics, or work instructions.

The successful candidate will demonstrate the skills and knowledge required to effectively and efficiently repair or replace defective Engineering micro-components and wiring to ensure installations meet Engineering conformity. This individual will demonstrate effective cable and harness repair techniques using acceptable practices including splicing, crimping, soldering, and pinning of wiring. The candidate will ensure that all work performed is properly and completely documented and ready for use. Verification and inspection may be required, and candidate will need to be able to identify and document findings per authorizing protocols. The candidate will also provide on-the-job recommendations in solving hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program and all safety regulations. The candidate may perform duties at various company locations.

What You Will Do

Modify, rework, and populate Engineering CCA’s, assemblies, and subassemblies to ensure proper operation per established criteria. Perform required repairs to returned and damaged units to an operational state. This includes:
• Micro-soldering under a microscope for an extensive period.
• Build cables and harnesses from schematics.
• Quality verification and inspection under a microscope
• Identify, repair, and replace wire harnesses and cable assemblies.
• Replace mechanical and electrical components.
• Operate multi-meters or basic ohmmeters to conduct point-to-point current connection.
• Recognize failures, isolate problems, and suggest appropriate corrective action.
• Keep management appraised of potential problems or identified risks that may negatively affect program schedule or quality.
• Provide support and feedback to the Engineering development team.

Qualifications You Must Have
• Associate degree with a minimum of 6 years relevant experience
• Experience with Solder, mechanical, quality standards, processes, and/or documentation.
• Verification and inspection experience with associated standards, processes, and/or documentation.
• Experience with cable and harness assembly, fabrication, and/or rework.
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer
• CCA manufacturing experience and associated fabrication standards, processes, and documentation.
• IPC J-STD-001 solder certification.
• IPC 610 and 620 acceptability certification and inspection experience.
• Motivated self-starter with the ability to use good judgement and work independently or collaboratively.
• Ability to perform quality work within a fast-paced Engineering technical support environment.
• Solder rework equipment to include reflow oven, mini-wave, pre-heater, hot air pencil, and de-solder tools.
• Ability to work with fabrication processes such as bonding, cleaning, coating, and mechanical fasteners.
• Ability to read and comprehend work instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
• Ability to establish customer priorities and manage multiple tasks successfully.
• Must have experience using hand tools such as soldering iron, cutters, wire strippers, and electric heat gun.
• Assembly, fabrication, and rework experience of micro-size components on circuit card assemblies.
• Existing secret security clearance.

What We Offer
• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• If applicable/optional - Relocation Eligibility

Learn More & Apply Now!
• Please consider the following role type definition as you apply for this role. (Select the one that fits the role type of the req)
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10+78.htm
• Location Info and/or Links:
• Tucson, AZ: https://careers.rtx.com/global/en/raytheon-tucson,-az-location

The salary range for this role is 50,000 USD - 100,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, ****** orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

United States
Arizona
Tucson Show on map Get directions