Job Description
Profile insights
Here’s how the job qualifications align with your profile.
Skills
Precision measuring instruments
(Required)
Hydraulics
(Required)
Micrometer
Calipers
Do you have experience in Precision measuring instruments?
Job details
Here’s how the job details align with your profile.
Pay
From $29.64 an hour
Job type
Full-time
Shift and schedule
12 hour shift
Location
Estimated commute
Add your address to estimate commute
Job address
2929 Bridge Street West, Owatonna, MN 55060
Benefits
Pulled from the full job description
401(k) matching
Disability insurance
Health insurance
Full job description
Position Overview:
The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press. From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.
Duties And Responsibilities:
Inspect, upend, and load coils onto the unwinder, ensuring proper feeding through the lubricator and into the press.
Perform setup, maintenance, and operation of the upender, unwinder, lubricator, and cupping press.
Oversee the setup, maintenance, and operation of body makers, trimmers, and conveying systems.
Monitors and record can specifications in the system, including flange wall thickness, mid-wall thickness, dome depth, and trim can height.
Conduct visual inspections and cup weight checks to ensure compliance with production standards.
Take corrective measures as necessary to maintain quality.
Assist in other production areas as needed to ensure can flow through the plant.
Complete required paperwork, including coil logs, check sheets, and other documentation.
Perform other job-related tasks as assigned.
Minimum Requirements
Working knowledge of pneumatics and hydraulics.
Basic knowledge of how electrical components work.
Ability to use precision measurement devices (i.e. calipers, micrometers and dial indicators).
Ability to demonstrate a strong understanding of applicable safety regulations, reinforcing a culture where safety is the top priority.
Ability to collaborate and communicate clearly with all team members.
Competencies:
Strong problem-solving skills through an individual and/or collaborative approach
Ability to work independently or with a team
Must be able to look at new solutions and “think outside the box”
Physical Requirements:
While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl.
The Team Member may lift and/or move up to 10 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.
Working Conditions:
Generally, working in a plant environment, but may be required to perform some job duties inside a typical office setting.
While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic.
The Team Member may be exposed to a wide range of temperatures.
The noise level is frequently loud.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
Benefits:
Crown provides competitive pay and performance-based bonuses for full-time team members. Employees receive comprehensive benefits, including free company-paid health insurance and a company matched 401(k). Hourly team members receive pension benefits, weekly pay, short-term and long-term disability coverage. These benefits begin on the first of the month after 30 days of employment.
Crown is an equal opportunity employer. Crown does not discriminate against any candidate or employee on the basis of race, national origin, sex, marital status, ****** orientation, age, disability, religion, veteran status, or any other status protected by law.
Here’s how the job qualifications align with your profile.
Skills
Precision measuring instruments
(Required)
Hydraulics
(Required)
Micrometer
Calipers
Do you have experience in Precision measuring instruments?
Job details
Here’s how the job details align with your profile.
Pay
From $29.64 an hour
Job type
Full-time
Shift and schedule
12 hour shift
Location
Estimated commute
Add your address to estimate commute
Job address
2929 Bridge Street West, Owatonna, MN 55060
Benefits
Pulled from the full job description
401(k) matching
Disability insurance
Health insurance
Full job description
Position Overview:
The Front End Maintainers work 12-hour shifts on for four days and off for four days. There are typically 3 Front End Maintainers on at one time. The Front End Maintainers initiate the can making process. Steel coils are transported by a fork lift to the upender where they are tipped on to their side. They are then transported again by coil car to the unwinder where they are mounted in place. Two Front End Maintainers guide the steel sheet through the lubricator and into the press. From this point the Front End Maintainers are responsible for the set up, operation and maintenance of the cupping press, body makers, trimmers, and conveying systems.
Duties And Responsibilities:
Inspect, upend, and load coils onto the unwinder, ensuring proper feeding through the lubricator and into the press.
Perform setup, maintenance, and operation of the upender, unwinder, lubricator, and cupping press.
Oversee the setup, maintenance, and operation of body makers, trimmers, and conveying systems.
Monitors and record can specifications in the system, including flange wall thickness, mid-wall thickness, dome depth, and trim can height.
Conduct visual inspections and cup weight checks to ensure compliance with production standards.
Take corrective measures as necessary to maintain quality.
Assist in other production areas as needed to ensure can flow through the plant.
Complete required paperwork, including coil logs, check sheets, and other documentation.
Perform other job-related tasks as assigned.
Minimum Requirements
Working knowledge of pneumatics and hydraulics.
Basic knowledge of how electrical components work.
Ability to use precision measurement devices (i.e. calipers, micrometers and dial indicators).
Ability to demonstrate a strong understanding of applicable safety regulations, reinforcing a culture where safety is the top priority.
Ability to collaborate and communicate clearly with all team members.
Competencies:
Strong problem-solving skills through an individual and/or collaborative approach
Ability to work independently or with a team
Must be able to look at new solutions and “think outside the box”
Physical Requirements:
While performing the duties of this job, the Team Member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl.
The Team Member may lift and/or move up to 10 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.
Working Conditions:
Generally, working in a plant environment, but may be required to perform some job duties inside a typical office setting.
While performing the duties of this job, the Team Member may be exposed to moving mechanical parts and vehicular traffic.
The Team Member may be exposed to a wide range of temperatures.
The noise level is frequently loud.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
Benefits:
Crown provides competitive pay and performance-based bonuses for full-time team members. Employees receive comprehensive benefits, including free company-paid health insurance and a company matched 401(k). Hourly team members receive pension benefits, weekly pay, short-term and long-term disability coverage. These benefits begin on the first of the month after 30 days of employment.
Crown is an equal opportunity employer. Crown does not discriminate against any candidate or employee on the basis of race, national origin, sex, marital status, ****** orientation, age, disability, religion, veteran status, or any other status protected by law.
💡 Quick Summary
Seeking a career-building opportunity? The FRONT END MAINTENANCE MECHANIC | DAYS 6A - 6P | 4 ON 4 OFF | STARTING $2*.64 position is now open for candidates interested in the Mechanic Jobs sector. This role in Owatonna offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Mechanic Jobs is a plus.