Job Description
Eaton’s IS AER FMC division is currently seeking a Inspector A. The core hours are 5:30am to 2:00pm. The hourly rate for this position is $30.54 - $45.82 per hour.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
## What you’ll do:
Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Precision Inspector A. The LA facility has approximately 300 employees and is a leader in the design, development, manufacture and delivery of Aerospace hydraulic components, systems and services to the global aftermarket and OEM markets.
Reports to the Quality Control manager or designated authority. Responsible for performing in-process and/or incoming dimensional and visual inspections of highly complex; closed tolerance hydraulic, pneumatic, electric and mechanical component parts, assemblies, and sub-assemblies as required.
• Inspects (Incoming and/or in-process) highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements. Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.
• Responsible for review and acceptance of paperwork and documentation used in the acceptance of product.
• Responsible to produce necessary manual or computer-generated inspection reports to accept or reject products.
• Inspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM.
• Use of geometrical tolerancing and dimensional measurements per ASME Y14.5.
• First article inspection (per AS9102) of highly complex, close tolerance aerospace products.
• Performs inspection on surface plates using complex inspection layout equipment.
• Operates Coordinate Measuring Machines during the performance of inspections.
• Witnesses and/or performs dimensional inspection on highly complex; closed tolerance machined components and tooling at suppliers (Source Inspection).
• Signs-off product as acceptable or alert of discrepancies at Eaton suppliers.
• Conducts investigation audits, corrective actions etc. as directed by Supplier Quality Engineering (SQE).
• Acts as a liaison for SQE to communicate and investigate supplier issues.
## Qualifications:
Basic (Required) Qualifications:
• Must have a high school diploma or GED from an accredited institution.
• A minimum of 5 years related experience in mechanical inspection of highly complex, close tolerance aerospace products.
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
• No relocation benefit is offered for this position. Only candidates residing within the immediate area of Los Angeles, (50 miles) will be considered for this position.
• This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Preferred Qualifications:
• Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.).
• Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.).
• College or ASQ (American Society for Quality) certification a plus.
• Experience working in FAA environment. Basic knowledge of DFAR and Nadcap requirements.
## Skills:
Position Criteria:
• Attendance/Punctuality/Dependability - Is consistently at work and on time; Uses time efficiently; follows instructions; commits to long hours of work when necessary to achieve goals. Able to work efficiently under fast pace environment.
• Quality/Quantity - Demonstrates accuracy and thoroughness; meets productivity standards; completes work in timely manner.
• Safety and Security - Follows safety procedures; reports potentially unsafe conditions; uses equipment and materials properly.
• Technical Skills - Pursues training and development opportunities; strives to continuously build knowledge and skills.
• Oral Communication – Speaks clearly and listens and gets clarification when needed; participates in meetings.
• Written Communication - Presents numerical data in a legible manner; able to read and interpret written information.
• Teamwork - Treats people with respect; contributes to building a positive team spirit; supports everyone's efforts to succeed.
• Organizational Support – Follows all policies and procedures; upholds organizational values. Must be highly motivated and committed to high quality standards.
• Professionalism - Approaches others in a tactful manner; treats others with respect and consideration; accepts responsibility for own actions
• Language Skills - Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to complete routine documentation. Ability to speak clearly and effectively with Manager/Supervisor, coworkers, customers, suppliers, etc.
• Mathematical Skills - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Reasoning Ability - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
• Computer Skills - Knowledge of Microsoft Office (Excel, Word, Outlook), internet, etc.
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, ****** orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-80XXXXXX to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
## What you’ll do:
Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Precision Inspector A. The LA facility has approximately 300 employees and is a leader in the design, development, manufacture and delivery of Aerospace hydraulic components, systems and services to the global aftermarket and OEM markets.
Reports to the Quality Control manager or designated authority. Responsible for performing in-process and/or incoming dimensional and visual inspections of highly complex; closed tolerance hydraulic, pneumatic, electric and mechanical component parts, assemblies, and sub-assemblies as required.
• Inspects (Incoming and/or in-process) highly complex; closed tolerance aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements. Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.
• Responsible for review and acceptance of paperwork and documentation used in the acceptance of product.
• Responsible to produce necessary manual or computer-generated inspection reports to accept or reject products.
• Inspection involves using precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate, and CMM.
• Use of geometrical tolerancing and dimensional measurements per ASME Y14.5.
• First article inspection (per AS9102) of highly complex, close tolerance aerospace products.
• Performs inspection on surface plates using complex inspection layout equipment.
• Operates Coordinate Measuring Machines during the performance of inspections.
• Witnesses and/or performs dimensional inspection on highly complex; closed tolerance machined components and tooling at suppliers (Source Inspection).
• Signs-off product as acceptable or alert of discrepancies at Eaton suppliers.
• Conducts investigation audits, corrective actions etc. as directed by Supplier Quality Engineering (SQE).
• Acts as a liaison for SQE to communicate and investigate supplier issues.
## Qualifications:
Basic (Required) Qualifications:
• Must have a high school diploma or GED from an accredited institution.
• A minimum of 5 years related experience in mechanical inspection of highly complex, close tolerance aerospace products.
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
• No relocation benefit is offered for this position. Only candidates residing within the immediate area of Los Angeles, (50 miles) will be considered for this position.
• This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Preferred Qualifications:
• Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.).
• Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.).
• College or ASQ (American Society for Quality) certification a plus.
• Experience working in FAA environment. Basic knowledge of DFAR and Nadcap requirements.
## Skills:
Position Criteria:
• Attendance/Punctuality/Dependability - Is consistently at work and on time; Uses time efficiently; follows instructions; commits to long hours of work when necessary to achieve goals. Able to work efficiently under fast pace environment.
• Quality/Quantity - Demonstrates accuracy and thoroughness; meets productivity standards; completes work in timely manner.
• Safety and Security - Follows safety procedures; reports potentially unsafe conditions; uses equipment and materials properly.
• Technical Skills - Pursues training and development opportunities; strives to continuously build knowledge and skills.
• Oral Communication – Speaks clearly and listens and gets clarification when needed; participates in meetings.
• Written Communication - Presents numerical data in a legible manner; able to read and interpret written information.
• Teamwork - Treats people with respect; contributes to building a positive team spirit; supports everyone's efforts to succeed.
• Organizational Support – Follows all policies and procedures; upholds organizational values. Must be highly motivated and committed to high quality standards.
• Professionalism - Approaches others in a tactful manner; treats others with respect and consideration; accepts responsibility for own actions
• Language Skills - Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to complete routine documentation. Ability to speak clearly and effectively with Manager/Supervisor, coworkers, customers, suppliers, etc.
• Mathematical Skills - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Reasoning Ability - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
• Computer Skills - Knowledge of Microsoft Office (Excel, Word, Outlook), internet, etc.
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, ****** orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-80XXXXXX to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
💡 Quick Summary
Seeking a career-building opportunity? The Inspector A position is now open for candidates interested in the Manufacturing Jobs sector. This role in Los Angeles offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Manufacturing Jobs is a plus.
