Job Description
Job description
Position: Maintenance Tech I
Job Summary
Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description
Responsibilities:
• Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
• Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line.
• Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
• Perform root cause analysis of major downtime events.
• Assist maintenance mechanics in work that requires two people or when operational needs demand.
• Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
• Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience:
Education
• High school diploma or equivalent.
Work Experience
• 3 years of experience with conveyor, automation, or robotics equipment repair and maintenance.
• Fundamental understanding of machinery/equipment.
• Basic skill level in multiple computer software packages including Microsoft Excel.
• Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems.
• Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
• Physical Abilities:
Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs.
• Must be able to stand for a minimum of 8 hours and up to 12 hours for up to 6 days a week.
• Must be willing to learn new equipment as it is brought on-line.
• Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
• Willing to operate material handling equipment (i.e. fork truck).
• Write documents and reports using writing instruments and computers.
• Read information, often in small print (drawings).
• Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment.
• Ensure a safe work environment by eliminating potential equipment safety hazards.
• Must be willing to work overtime as needed.
Preferred Qualifications
• Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
• Graduate of an apprenticeship program or hold current trade certification.
• At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position:
• Ability to bend, twist, reach, push, lift for extended periods daily - Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs.
• Must be able to stand for a minimum of 8 hours and up to 12 hours for up to 6 days a week.
• Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
• Willing to operate material handling equipment (i.e. fork truck).
• Write documents and reports using writing instruments and computers.
• Read information, often in small print (drawings).
• Follow appropriate safety…
Position: Maintenance Tech I
Job Summary
Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description
Responsibilities:
• Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.
• Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line.
• Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
• Perform root cause analysis of major downtime events.
• Assist maintenance mechanics in work that requires two people or when operational needs demand.
• Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
• Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Required Experience:
Education
• High school diploma or equivalent.
Work Experience
• 3 years of experience with conveyor, automation, or robotics equipment repair and maintenance.
• Fundamental understanding of machinery/equipment.
• Basic skill level in multiple computer software packages including Microsoft Excel.
• Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems.
• Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
• Physical Abilities:
Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs.
• Must be able to stand for a minimum of 8 hours and up to 12 hours for up to 6 days a week.
• Must be willing to learn new equipment as it is brought on-line.
• Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
• Willing to operate material handling equipment (i.e. fork truck).
• Write documents and reports using writing instruments and computers.
• Read information, often in small print (drawings).
• Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment.
• Ensure a safe work environment by eliminating potential equipment safety hazards.
• Must be willing to work overtime as needed.
Preferred Qualifications
• Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
• Graduate of an apprenticeship program or hold current trade certification.
• At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.
Physical activities necessary to perform one or more essential functions of the position:
• Ability to bend, twist, reach, push, lift for extended periods daily - Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs.
• Must be able to stand for a minimum of 8 hours and up to 12 hours for up to 6 days a week.
• Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.
• Willing to operate material handling equipment (i.e. fork truck).
• Write documents and reports using writing instruments and computers.
• Read information, often in small print (drawings).
• Follow appropriate safety…
💡 Quick Summary
Seeking a career-building opportunity? The Maintenance Tech position is now open for candidates interested in the Mechanic Jobs sector. This role in Uxbridge offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Mechanic Jobs is a plus.
