Maintenance Technician

Job highlights
Identified by Google from the original job post
Qualifications
This position requires continuous work near heat, noise, gas, and chemicals
18 years or older
Pass technical assessment addressing job-critical maintenance knowledge areas
Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings)
Experience with product manuals (e.g., reading and applying knowledge to make repairs)
Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns)
Experience with reading mechanical drawings (e.g., hydraulics, pneumatics)
Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)
Experience with compressors/ammonia systems (e.g., refrigeration systems)
Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls)
Experience with electrical systems (installation, frequency drive, troubleshooting)
Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.)
Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts)
Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting)
Experience with kinematics (e.g., line speed/sprocket size ratios, etc.)
Review rating instructions
Experience with packaging/high speed production (e.g., bottling, consumer products, etc.)
Experience with PLC (e.g., industrial maintenance, computer control systems, etc.)
Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting)
Experience with pneumatics/air compression (e.g., valves, cylinders, etc.)
Experience with preventative maintenance (computerized preventative charts/data)
Experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs)
Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays)
Experience with SERVO (e.g., intelligent/robotic motors, in-coders, etc.)
Experience with troubleshooting (e.g., diagnostics, problem solving, etc.)
Experience working in team based environments (working together with others)
Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4+01-4+1+, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article + of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance
Benefits
PBNA $33.+5 / hour
Responsibilities
Position is responsible for repairing and installing production/manufacturing equipment
Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications
Diagnoses equipment malfunctions and makes repairs or adjustments as needed
Must have own hand tools
The position requires frequent lifting, climbing, standing, walking, crouching, squatting, bending and kneeling
The position may require weekend and/or holiday work
Perform preventative maintenance on production equipment
Repair all production equipment as needed
Perform breakdown analysis
Perform general housekeeping
Upgrade production lines with new equipment/technology
Work with outside contractors working on assigned line
Change line for package changeovers
Comply with GMP, safety, and audit standards
Work independently under limited supervision (self-management)Documentation of work schedule and work tasks completed
Job description
PBNA $33.+5 / hourCLICK HERE to view our Maintenance Mechanic Job Preview Video

Position is responsible for repairing and installing production/manufacturing equipment. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnoses equipment malfunctions and makes repairs or adjustments as needed. Must have own hand tools. This position requires continuous work near heat, noise, gas, and chemicals. The position requires frequent lifting, climbing, standing, walking, crouching, squatting, bending and kneeling. The position may require weekend and/or holiday work.

PRIMARY ACCOUNTABILITIES:
• Perform preventative maintenance on production equipment
• Repair all production equipment as needed
• Perform breakdown analysis
• Perform general housekeeping
• Upgrade production lines with new equipment/technology
• Work with outside contractors working on assigned line
• Change line for package changeovers
• Comply with GMP, safety, and audit standards
• Work independently under limited supervision (self-management)Documentation of work schedule and work tasks completed
BASIC QUALIFICATIONS:
• 18 years or older
• Pass technical assessment addressing job-critical maintenance knowledge areas
• Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings).
• Experience with product manuals (e.g., reading and applying knowledge to make repairs).
• Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns).
• Experience with reading mechanical drawings (e.g., hydraulics, pneumatics).

HELPFUL EXPERIENCE:
• Experience with basic electrical systems (e.g., starters, fuses, contacts, relays).
• Experience with compressors/ammonia systems (e.g., refrigeration systems).
• Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls).
• Experience with electrical systems (installation, frequency drive, troubleshooting)
• Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.).
• Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts).
• Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting).
• Experience with kinematics (e.g., line speed/sprocket size ratios, etc.).
• Review rating instructions.
• Experience with packaging/high speed production (e.g., bottling, consumer products, etc.).
• Experience with PLC (e.g., industrial maintenance, computer control systems, etc.).
• Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting).
• Experience with pneumatics/air compression (e.g., valves, cylinders, etc.).
• Experience with preventative maintenance (computerized preventative charts/data).
• Experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs).
• Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays).
• Experience with SERVO (e.g., intelligent/robotic motors, in-coders, etc.)
• Experience with troubleshooting (e.g., diagnostics, problem solving, etc.).
• Experience working in team based environments (working together with others).

Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4+01-4+1+, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article + of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance.
>

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, ****** orientation, gender identity, national origin, protected veteran status, or disability status.

PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / ****** Orientation / Gender Identity

If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy.

Please view our Pay Transparency Statement

United States
Texas
Mesquite
Mesquite, TX, United States Show on map Get directions