Job Description
Job description
Job Details
Job Location
Oxnard, CA
Position Type
Regular Full Time
Education Level
Bachelors Degree
Salary Range
$112,065.00 - $165,000.00 Salary
Job Shift
Day
Job Category
Engineering
Description
Motion Control Programmer Salary Range $112,065 - $165,000/ Yr.
As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we’re not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available.
Oh, and yes, we are the same Haas that owns the Stewart-Haas Racing NASCAR teams, and the Haas F1 Team from the Netflix series: Drive to Survive.
Motion Control Programmer 3 designs, develops, maintains, tests, and evaluates software for CNC computer control system under limited supervision of the Software Engineering Supervisor.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Add Essential Duties And Responsibilities According To Position.
• Proposes problem solutions through analysis, problem definition, requirement generation and implementation of those solutions.
• Creates documentation and supporting diagrams supporting solutions.
• Prepares and installs source code into source control by determining compliance of software changes with system specifications, programming best practices, and ensuring these changes are free from defects.
• Improves workflow by conducting analysis, and recommending changes in policies and procedures to management.
• Must be an active coder.
• Creates bug reports through investigation and by collecting, analyzing data, and providing clear documentation on reproduction of observed issues.
• Communicate technical ideas clearly, able to use Microsoft Office applications when appropriate.
• Employees are expected to follow instructions, procedures and to escalate any issue impacting workflow, quality, etc.
• Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies.
Supervisory Responsibilities
Supervisory Responsibilities
Supervised Employees
This job does not have any supervisory activities.
0
Qualifications
Qualifications
To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications
• 3+ years of coding experience.
• Expertise in Java, C and C++.
• Experience in Control Theory
• Experience in Digital Control
• Implemented PID control systems for the motion of a robotic arm
• OOP (Object Orientated Programming) knowledge.
• Experience reading and writing bash and batch scripts (basic).
• Comfortable working in Windows and Linux environments. Linux is not a requirement, but will have to learn.
• Experience with inter-process communication (Google Protocol Buffers is a plus).
• Experience in writing and debugging multi-threaded applications.
• Understanding of real time systems, XML , file systems, networking, multi-threaded applications, computer graphics, linear algebra, calculus, geometry, and trigonometry, human-computer interaction/User Interface design, design patterns, encryption, hashing, checksums, and CRCs (Cyclical Redundancy Check).
• Experience working with source-control system.
Education
Master's Degree MA/MS from a four-year college or university is required, plus additional related experience, training and/or equivalent combination of education and experience.
Preferred Major
Math
Physics
Electrical Engineering
Minimum Years Of Experience
3-5 years
Language Skills
Must have the ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and/or governmental regulations in English. Must be able to write analytical and/or technical reports, business correspondence, procedure manuals, and create instructional reference material. Able to speak effectively before groups, customers, employees of the organization and/or the general public.
Mathematical Skills
Must have an advanced understanding of mathematical concepts including but not limited to probability, statistical inference, fundamentals of plane and solid geometry, trigonometry, and/or calculus.
Reasoning Ability
Must have the ability to apply principles of logical and scientific thinking and work with a wide range of intellectual and practical problems. Must have the capability to deal with a variety of abstract and/or concrete variables. In addition, will need to interpret a variety of instructions furnished in written, oral, diagram, and/or schedule form.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Activity
Duration
Sitting
Frequently
Standing
Occasionally
Walking
Occasionally
Bending (neck)
Frequently
Bending (waist)
Rarely
Squatting
Rarely
Twisting (neck)
Occasionally
Twisting (waist)
Occasionally
Climbing
Rarely
Kneeling
Rarely
Crawling
Rarely
Reaching (above shoulder level)
Occasionally
Reaching (below shoulder level)
Occasionally
Hand Use
Duration
Repetitive use of hand
Frequently
Simple grasping
Frequently
Power grasping
Occasionally
Fine manipulation
Frequently
Pushing & Pulling
Frequently
Vision
Required
Close vision
Yes
Distance vision
Yes
Color vision
Yes
Peripheral vision
Yes
Depth perception
Yes
Adjust focus
Yes
Lifting Requirements
Duration
0-10 lbs.
Occasionally
11-25 lbs.
Occasionally
26-50 lbs.
Occasionally
51-60 lbs.
Never
61+ lbs.
Never
Equipment Use
Duration
This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc.
Frequently
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Noise Level
The Noise Level In The Work Environment Is Usually
Moderate and occasionally loud
Work Environment
Duration
This position operates in a general office or engineering lab environment
Frequently
Employee will work around machining or on the production floor
Occasionally
Employee is exposed to moving mechanical parts and vibration
Rarely
Employee is exposed to hazardous chemicals, fumes or airborne particles
Never
Employee is exposed to outside weather conditions, extreme cold or extreme heat
Never
Employee is exposed to risk of electrical shock
Never
Job Details
Job Location
Oxnard, CA
Position Type
Regular Full Time
Education Level
Bachelors Degree
Salary Range
$112,065.00 - $165,000.00 Salary
Job Shift
Day
Job Category
Engineering
Description
Motion Control Programmer Salary Range $112,065 - $165,000/ Yr.
As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we’re not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available.
Oh, and yes, we are the same Haas that owns the Stewart-Haas Racing NASCAR teams, and the Haas F1 Team from the Netflix series: Drive to Survive.
Motion Control Programmer 3 designs, develops, maintains, tests, and evaluates software for CNC computer control system under limited supervision of the Software Engineering Supervisor.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Add Essential Duties And Responsibilities According To Position.
• Proposes problem solutions through analysis, problem definition, requirement generation and implementation of those solutions.
• Creates documentation and supporting diagrams supporting solutions.
• Prepares and installs source code into source control by determining compliance of software changes with system specifications, programming best practices, and ensuring these changes are free from defects.
• Improves workflow by conducting analysis, and recommending changes in policies and procedures to management.
• Must be an active coder.
• Creates bug reports through investigation and by collecting, analyzing data, and providing clear documentation on reproduction of observed issues.
• Communicate technical ideas clearly, able to use Microsoft Office applications when appropriate.
• Employees are expected to follow instructions, procedures and to escalate any issue impacting workflow, quality, etc.
• Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies.
Supervisory Responsibilities
Supervisory Responsibilities
Supervised Employees
This job does not have any supervisory activities.
0
Qualifications
Qualifications
To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications
• 3+ years of coding experience.
• Expertise in Java, C and C++.
• Experience in Control Theory
• Experience in Digital Control
• Implemented PID control systems for the motion of a robotic arm
• OOP (Object Orientated Programming) knowledge.
• Experience reading and writing bash and batch scripts (basic).
• Comfortable working in Windows and Linux environments. Linux is not a requirement, but will have to learn.
• Experience with inter-process communication (Google Protocol Buffers is a plus).
• Experience in writing and debugging multi-threaded applications.
• Understanding of real time systems, XML , file systems, networking, multi-threaded applications, computer graphics, linear algebra, calculus, geometry, and trigonometry, human-computer interaction/User Interface design, design patterns, encryption, hashing, checksums, and CRCs (Cyclical Redundancy Check).
• Experience working with source-control system.
Education
Master's Degree MA/MS from a four-year college or university is required, plus additional related experience, training and/or equivalent combination of education and experience.
Preferred Major
Math
Physics
Electrical Engineering
Minimum Years Of Experience
3-5 years
Language Skills
Must have the ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and/or governmental regulations in English. Must be able to write analytical and/or technical reports, business correspondence, procedure manuals, and create instructional reference material. Able to speak effectively before groups, customers, employees of the organization and/or the general public.
Mathematical Skills
Must have an advanced understanding of mathematical concepts including but not limited to probability, statistical inference, fundamentals of plane and solid geometry, trigonometry, and/or calculus.
Reasoning Ability
Must have the ability to apply principles of logical and scientific thinking and work with a wide range of intellectual and practical problems. Must have the capability to deal with a variety of abstract and/or concrete variables. In addition, will need to interpret a variety of instructions furnished in written, oral, diagram, and/or schedule form.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Activity
Duration
Sitting
Frequently
Standing
Occasionally
Walking
Occasionally
Bending (neck)
Frequently
Bending (waist)
Rarely
Squatting
Rarely
Twisting (neck)
Occasionally
Twisting (waist)
Occasionally
Climbing
Rarely
Kneeling
Rarely
Crawling
Rarely
Reaching (above shoulder level)
Occasionally
Reaching (below shoulder level)
Occasionally
Hand Use
Duration
Repetitive use of hand
Frequently
Simple grasping
Frequently
Power grasping
Occasionally
Fine manipulation
Frequently
Pushing & Pulling
Frequently
Vision
Required
Close vision
Yes
Distance vision
Yes
Color vision
Yes
Peripheral vision
Yes
Depth perception
Yes
Adjust focus
Yes
Lifting Requirements
Duration
0-10 lbs.
Occasionally
11-25 lbs.
Occasionally
26-50 lbs.
Occasionally
51-60 lbs.
Never
61+ lbs.
Never
Equipment Use
Duration
This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc.
Frequently
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Noise Level
The Noise Level In The Work Environment Is Usually
Moderate and occasionally loud
Work Environment
Duration
This position operates in a general office or engineering lab environment
Frequently
Employee will work around machining or on the production floor
Occasionally
Employee is exposed to moving mechanical parts and vibration
Rarely
Employee is exposed to hazardous chemicals, fumes or airborne particles
Never
Employee is exposed to outside weather conditions, extreme cold or extreme heat
Never
Employee is exposed to risk of electrical shock
Never
💡 Quick Summary
Seeking a career-building opportunity? The Motion Control Programmer |44435 position is now open for candidates interested in the IT Engineer & Developer Jobs sector. This role in Oxnard offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in IT Engineer & Developer Jobs is a plus.
