Job Description
Technical Lead
Qualification:
Bachelor's in engineering or equivalent
Responsibility:
Project Planning & Setup:
• Understand and contribute to resource plan.
• Identify appropriate processes based on project landscape.
• Identify gaps and advise on improvements if required.
• Share inputs in creation of project plan.
• Contribute to hardware/software requirement plan.
• Understand the test strategy, evaluate the design and identify gaps in the test plans, if any.
Requirement Gathering and Analysis:
• Analyze functional/non functional requirements and seek clarifications for better understanding of requirements.
• Define timeline estimates based on the requirements, complexity and inhouse capability.
• Communicate estimates to supervisor for review.
• Provide inputs on technical feasibility of requirements.
• Identify gaps in requirements.
• Share additional requirements identified with supervisor.
Design:
• Guide team in preparation of technical specification document and review the same.
• Break down the base lines requirements into business and functional requirements.
• Prepare high level and low level design and share with supervisor for approval.
• Identify tools and technologies to be used in the project as well as reusable objects that could be customized for the project.
• Share the design document with the functional team post supervisor review.
Coding:
• Guide team in coding as per design.
• Follow coding standards and best practices to check code quality.
• Share developed code with supervisor for review.
• Rework on the code based on inputs if required.
• Perform complex integration.
• Guide the developers in identifying, preparing and conducting unit test cases and fixing defects based on results.
• Consolidate the test results and share with supervisor.
• Provide periodic status update to supervisor and highlight / recommend any changes in design based on challenges faced.
• Anticipate unreported defects and raise the same to supervisor.
• Conduct technical troubleshooting.
• Conduct reviews for codes created by team.
Testing:
• Coordinate with QA team during the testing phase.
• Address queries raised by QA within defined timelines.
• Conduct functional / non functional testing if required.
• Investigate critical defects and establish need for fixing.
• Fix complex defects identified during functional / non functional testing.
• Understand the defect impact / criticality and handle accordingly.
• Raise issues to leads/QA.
• Report defect status as per project standard process within agreed timelines.
• Review defect fixes done by team guide them.
• Fix defects identified during UAT within agreed timelines.
• Share revised code with supervisor for review.
• Assist team lead and project manager on estimates around defect fixes.
Deployment & Closure:
• Conduct allocated transition tasks as per agreed timelines.
• Address queries / provide assistance in fixing issues during warranty period.
• Provide prompt response during production support.
• Fix defects as and when required.
• Review defect fixes.
• Maintain deployment tracker.
• Perform sanity check post deployment to ensure smooth production.
• Share activity status with supervisor and highlight concerns if any.
Service Support & Maintenance:
• Participate in scoping meetings and identify transition requirements for new projects.
• Reconfirm requirements with relevant stakeholders.
• Freeze SME calendar.
• Provide transition activities.
• Regularly track progress of transitions through weekly dashboards.
• Attend user calls, and capture required information and incident details for logging.
• Post information gathering, identify whether the incoming request is a service request or an incident.
• Determine urgency and impact of the situation.
• Assign appropriate priority to the incident.
• Assign the incident to the right stakeholder for a workaround/fix.
• Conduct analysis on various incidents that occur frequently Categorize recurring incidents as problems/known errors.
• Provide support to resolve these errors.
• Initiate change management process.
Knowledge Management:
• Create specific artifacts for tasks allocated by supervisor.
• Share artifact with supervisor for review.
• Upload article in the knowledge management repository.
• Seek inputs from knowledge repository to resolve problems.
• Apply best practices/ learning during development activities.
People Management:
• Provide support in creation of training courses and supporting artifacts on the training server such as demo, presentation.
• Conduct training with the help of academy and mentoring with respect to domain.
• Mentor new joiners in EAS function on an ongoing basis.
• Provide support to various project managers in identification of training needs of their subordinates.
• Provide inputs during goal setting and performance appraisal.
Must Have Skills
• SFMC-CDP and DMP
Qualification:
Bachelor's in engineering or equivalent
Responsibility:
Project Planning & Setup:
• Understand and contribute to resource plan.
• Identify appropriate processes based on project landscape.
• Identify gaps and advise on improvements if required.
• Share inputs in creation of project plan.
• Contribute to hardware/software requirement plan.
• Understand the test strategy, evaluate the design and identify gaps in the test plans, if any.
Requirement Gathering and Analysis:
• Analyze functional/non functional requirements and seek clarifications for better understanding of requirements.
• Define timeline estimates based on the requirements, complexity and inhouse capability.
• Communicate estimates to supervisor for review.
• Provide inputs on technical feasibility of requirements.
• Identify gaps in requirements.
• Share additional requirements identified with supervisor.
Design:
• Guide team in preparation of technical specification document and review the same.
• Break down the base lines requirements into business and functional requirements.
• Prepare high level and low level design and share with supervisor for approval.
• Identify tools and technologies to be used in the project as well as reusable objects that could be customized for the project.
• Share the design document with the functional team post supervisor review.
Coding:
• Guide team in coding as per design.
• Follow coding standards and best practices to check code quality.
• Share developed code with supervisor for review.
• Rework on the code based on inputs if required.
• Perform complex integration.
• Guide the developers in identifying, preparing and conducting unit test cases and fixing defects based on results.
• Consolidate the test results and share with supervisor.
• Provide periodic status update to supervisor and highlight / recommend any changes in design based on challenges faced.
• Anticipate unreported defects and raise the same to supervisor.
• Conduct technical troubleshooting.
• Conduct reviews for codes created by team.
Testing:
• Coordinate with QA team during the testing phase.
• Address queries raised by QA within defined timelines.
• Conduct functional / non functional testing if required.
• Investigate critical defects and establish need for fixing.
• Fix complex defects identified during functional / non functional testing.
• Understand the defect impact / criticality and handle accordingly.
• Raise issues to leads/QA.
• Report defect status as per project standard process within agreed timelines.
• Review defect fixes done by team guide them.
• Fix defects identified during UAT within agreed timelines.
• Share revised code with supervisor for review.
• Assist team lead and project manager on estimates around defect fixes.
Deployment & Closure:
• Conduct allocated transition tasks as per agreed timelines.
• Address queries / provide assistance in fixing issues during warranty period.
• Provide prompt response during production support.
• Fix defects as and when required.
• Review defect fixes.
• Maintain deployment tracker.
• Perform sanity check post deployment to ensure smooth production.
• Share activity status with supervisor and highlight concerns if any.
Service Support & Maintenance:
• Participate in scoping meetings and identify transition requirements for new projects.
• Reconfirm requirements with relevant stakeholders.
• Freeze SME calendar.
• Provide transition activities.
• Regularly track progress of transitions through weekly dashboards.
• Attend user calls, and capture required information and incident details for logging.
• Post information gathering, identify whether the incoming request is a service request or an incident.
• Determine urgency and impact of the situation.
• Assign appropriate priority to the incident.
• Assign the incident to the right stakeholder for a workaround/fix.
• Conduct analysis on various incidents that occur frequently Categorize recurring incidents as problems/known errors.
• Provide support to resolve these errors.
• Initiate change management process.
Knowledge Management:
• Create specific artifacts for tasks allocated by supervisor.
• Share artifact with supervisor for review.
• Upload article in the knowledge management repository.
• Seek inputs from knowledge repository to resolve problems.
• Apply best practices/ learning during development activities.
People Management:
• Provide support in creation of training courses and supporting artifacts on the training server such as demo, presentation.
• Conduct training with the help of academy and mentoring with respect to domain.
• Mentor new joiners in EAS function on an ongoing basis.
• Provide support to various project managers in identification of training needs of their subordinates.
• Provide inputs during goal setting and performance appraisal.
Must Have Skills
• SFMC-CDP and DMP
💡 Quick Summary
Seeking a career-building opportunity? The Senior Software Engineer position is now open for candidates interested in the Software Developer Jobs sector. This role in Pune offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Software Developer Jobs is a plus.
