Job Description
Qualifications
B.S. degree in Engineering with 2+ years applicable experience or
M.S. degree in Engineering
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract
Degree in Mechanical Engineering or Manufacturing Engineering
Six Sigma green belt or equivalent
Experience in investment casting in areas of wax injection/assembly and grinding
Experience with airfoil tooling, injection tooling and related dimensional qualification processes
Experience with Unigraphics NX
Benefits
The salary range provided is a good faith estimate representative of all experience levels
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays
Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement
Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance
Responsibilities
The Wax and Post Cast Process Engineer will be responsible for developing the investment casting wax injection, wax assembly, and post cast processes for the castings of today and tomorrow
This is a dynamic role supporting the development of processes for all parts in the RPCL and leading activities to improve process capability, including execution of new capital projects
Lead development of production processes, work instructions, quality requirements, and regulatory requirements for investment castings
Develop and deploy standardized engineering practices, processes, tools, and methods
Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for and lead execution of process improvement projects to reduce process variation, increase throughput, and improve part quality
Lead activities to increase the Manufacturing Readiness Level (MRL) for new parts and technologies
Develop ideas, secure funding, and execute capital equipment projects to improve process capability
Onsite: Employees who are working in Onsite roles will work primarily onsite
This includes all production and maintenance workers, as they are essential to the development of our engines
Job description
Date Posted:
2026-08-05
Country:
United States of America
Location:
PW100: East Hartford 400 Main Street, East Hartford, CT, 06118 USA
Position Role Type:
Onsite
Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.
Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
What You Will Do:
The Wax and Post Cast Process Engineer will be responsible for developing the investment casting wax injection, wax assembly, and post cast processes for the castings of today and tomorrow. This is a dynamic role supporting the development of processes for all parts in the RPCL and leading activities to improve process capability, including execution of new capital projects.
Key Responsibilities
• Lead development of production processes, work instructions, quality requirements, and regulatory requirements for investment castings
• Develop and deploy standardized engineering practices, processes, tools, and methods
• Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for and lead execution of process improvement projects to reduce process variation, increase throughput, and improve part quality.
• Lead activities to increase the Manufacturing Readiness Level (MRL) for new parts and technologies
• Develop ideas, secure funding, and execute capital equipment projects to improve process capability
Qualifications You Must Have:
• B.S. degree in Engineering with 2+ years applicable experience or
• M.S. degree in Engineering
• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications We Prefer:
• Degree in Mechanical Engineering or Manufacturing Engineering
• Six Sigma green belt or equivalent
• Experience in investment casting in areas of wax injection/assembly and grinding
• Experience with airfoil tooling, injection tooling and related dimensional qualification processes
• Experience with Unigraphics NX
Learn More & Apply Now:
In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
The salary range for this role is 64,000 USD - 128,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, ****** orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
B.S. degree in Engineering with 2+ years applicable experience or
M.S. degree in Engineering
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract
Degree in Mechanical Engineering or Manufacturing Engineering
Six Sigma green belt or equivalent
Experience in investment casting in areas of wax injection/assembly and grinding
Experience with airfoil tooling, injection tooling and related dimensional qualification processes
Experience with Unigraphics NX
Benefits
The salary range provided is a good faith estimate representative of all experience levels
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays
Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement
Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance
Responsibilities
The Wax and Post Cast Process Engineer will be responsible for developing the investment casting wax injection, wax assembly, and post cast processes for the castings of today and tomorrow
This is a dynamic role supporting the development of processes for all parts in the RPCL and leading activities to improve process capability, including execution of new capital projects
Lead development of production processes, work instructions, quality requirements, and regulatory requirements for investment castings
Develop and deploy standardized engineering practices, processes, tools, and methods
Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for and lead execution of process improvement projects to reduce process variation, increase throughput, and improve part quality
Lead activities to increase the Manufacturing Readiness Level (MRL) for new parts and technologies
Develop ideas, secure funding, and execute capital equipment projects to improve process capability
Onsite: Employees who are working in Onsite roles will work primarily onsite
This includes all production and maintenance workers, as they are essential to the development of our engines
Job description
Date Posted:
2026-08-05
Country:
United States of America
Location:
PW100: East Hartford 400 Main Street, East Hartford, CT, 06118 USA
Position Role Type:
Onsite
Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.
Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
What You Will Do:
The Wax and Post Cast Process Engineer will be responsible for developing the investment casting wax injection, wax assembly, and post cast processes for the castings of today and tomorrow. This is a dynamic role supporting the development of processes for all parts in the RPCL and leading activities to improve process capability, including execution of new capital projects.
Key Responsibilities
• Lead development of production processes, work instructions, quality requirements, and regulatory requirements for investment castings
• Develop and deploy standardized engineering practices, processes, tools, and methods
• Use Lean Manufacturing and Continuous Improvement tools to develop and prioritize ideas for and lead execution of process improvement projects to reduce process variation, increase throughput, and improve part quality.
• Lead activities to increase the Manufacturing Readiness Level (MRL) for new parts and technologies
• Develop ideas, secure funding, and execute capital equipment projects to improve process capability
Qualifications You Must Have:
• B.S. degree in Engineering with 2+ years applicable experience or
• M.S. degree in Engineering
• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications We Prefer:
• Degree in Mechanical Engineering or Manufacturing Engineering
• Six Sigma green belt or equivalent
• Experience in investment casting in areas of wax injection/assembly and grinding
• Experience with airfoil tooling, injection tooling and related dimensional qualification processes
• Experience with Unigraphics NX
Learn More & Apply Now:
In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
The salary range for this role is 64,000 USD - 128,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, ****** orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
💡 Quick Summary
Seeking a career-building opportunity? The Casting Process Engineer | Wax and Post Cast |Onsite position is now open for candidates interested in the Labour/Helper Jobs sector. This role in East Hartford offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Labour/Helper Jobs is a plus.
