Job Description
Qualifications
You must have an MSHA within the last 5 years
5 or more years of experience as a Journeyman Millwright / Mechanic
MSHA certification within the last 5 years
A valid driver’s license is required upon hire and as a condition of continued employment
High School Diploma or GED equivalent
Willing to travel to Alaska
Ability to develop and sustain positive working relationships with all personnel
Possess good communication skills, i.e., written, verbal and listening
Tool Bag
Screw driver set –minimum 6 piece set
Channel locks 12”
Wire cutters
Pipe wrench 14 or 18” ( steel or aluminum)
Chisel
Hammer 24oz
ballpein (3LB sledge recommended as well)
Tape measure 25 FT
Utility or razor knife with changeable blades
Chisel scrapper
Torpedo Level
Must be skilled in use of cutting/welding equipment (torch, welder)
Ability to operate forklift, come along, air impacts, air hoist, tugger, hydraulic rams, porta powers, pressure washer
Beginning ability to analyze job and tools required
Benefits
Welding Hood
Starting at $32-38 / hr, based on experience and qualifications
$75 per diem on travel days
$200 MOB In, $200 MOB Out
Flights covered by RAM
Meals and lodging provided on-site on work days
Responsibilities
This is an hourly, non-exempt position that will report to the General Foreman
In this position, you must understand and promote Safety as your top priority
Socket set with ratchet -1/2” drive 3/8 – 1 ¼”
Allen wrench set up to 3/8”
Pry bar set 12” & 18”
Alignment punch or roll head pry bar
Adjustable wrenches 8, 10, & 12 “ (spud style is also alignment tool)
This position requires a commitment to safety as our number one priority, and a strong dedication to producing quality work
Identify and properly use, inspect and maintain personal protective equipment, including but not limited to: waterproof steeltoe boots, glasses, hardhat, gloves, face shield, goggles, leathers, earplugs
Be able and willing to work a variety of schedules, including day or night shifts
Comply with all policies and procedures in Employee Handbook
Ability to safely lift 75-100 lbs frequently, using proper lifting techniques
Understand and perform lock out/tag out procedures
Identify and use basic rigging/lifting devices (cables, chains, come along, shackles, slings, straps, electric winches)
Identify and use basic tools (hand tools: shovel, rake, pick, mill bars, wrenches, sockets, hammers, screwdrivers, pliers, measuring tape) (electric tools: impacts, drills, grinders, chop saw, band saw, winches, air compressor, generators)
Ability to drive truck/trailer combinations
Identify the tools and equipment needed for the task at hand
Perform routine maintenance and liner replacement on all crushing and milling equipment, including cone and gyratory crushers, roaster mills, ball mills, SAG mills, slurry pumps and cyclones
Ability to perform conveyor pulley replacement, repair and rebuild
Other job duties as assigned by management
While performing the duties of this job, you will be required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see
Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, gloves and other required protective equipment as required
Job description
Job Summary: We are seeking hardworking, experienced Journeyman Millwright / Mechanics with AT LEAST 5 years of experience. You must have an MSHA within the last 5 years. This position is for a week long project in Red Dog, Alaska from July 3rd - July 11th. This is an hourly, non-exempt position that will report to the General Foreman. In this position, you must understand and promote Safety as your top priority.
Requirements:
• 5 or more years of experience as a Journeyman Millwright / Mechanic
• MSHA certification within the last 5 years
• A valid driver’s license is required upon hire and as a condition of continued employment
• High School Diploma or GED equivalent
• Willing to travel to Alaska
• Ability to develop and sustain positive working relationships with all personnel
• Possess good communication skills, i.e., written, verbal and listening
• Must bring these tools:
• Tool Bag
• Screw driver set –minimum 6 piece set
• Wrench set -3/8-1 ¼”
• Socket set with ratchet -1/2” drive 3/8 – 1 ¼”
• Allen wrench set up to 3/8”
• Pry bar set 12” & 18”
• Alignment punch or roll head pry bar
• Channel locks 12”
• Wire cutters
• Adjustable wrenches 8, 10, & 12 “ (spud style is also alignment tool)
• Pipe wrench 14 or 18” ( steel or aluminum)
• Chisel
• Hammer 24oz. ballpein (3LB sledge recommended as well)
• Tape measure 25 FT.
• Utility or razor knife with changeable blades
• Chisel scrapper
• Torpedo Level
• Welding Hood
Job Duties and Responsibilities include but aren’t limited to:
• This position requires a commitment to safety as our number one priority, and a strong dedication to producing quality work
• Identify and properly use, inspect and maintain personal protective equipment, including but not limited to: waterproof steeltoe boots, glasses, hardhat, gloves, face shield, goggles, leathers, earplugs
• Be able and willing to work a variety of schedules, including day or night shifts
• Comply with all policies and procedures in Employee Handbook
• Ability to safely lift 75-100 lbs frequently, using proper lifting techniques
• Understand and perform lock out/tag out procedures
• Identify and use basic rigging/lifting devices (cables, chains, come along, shackles, slings, straps, electric winches)
• Identify and use basic tools (hand tools: shovel, rake, pick, mill bars, wrenches, sockets, hammers, screwdrivers, pliers, measuring tape) (electric tools: impacts, drills, grinders, chop saw, band saw, winches, air compressor, generators)
• Must be skilled in use of cutting/welding equipment (torch, welder)
• Ability to operate forklift, come along, air impacts, air hoist, tugger, hydraulic rams, porta powers, pressure washer
• Beginning ability to analyze job and tools required
• Ability to drive truck/trailer combinations
• Identify the tools and equipment needed for the task at hand
• Perform routine maintenance and liner replacement on all crushing and milling equipment, including cone and gyratory crushers, roaster mills, ball mills, SAG mills, slurry pumps and cyclones
• Ability to perform conveyor pulley replacement, repair and rebuild
• Other job duties as assigned by management
Criteria/Conditions:
• Work is performed in various industrial settings, including; Shop environment, mining environment, construction environment. Work sites may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, airborne particles and fumes from adhesives, solvents and paints.
• While performing the duties of this job, you will be required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see
• Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, gloves and other required protective equipment as required
Pay:
• Starting at $32-38 / hr, based on experience and qualifications
• $75 per diem on travel days
• $200 MOB In, $200 MOB Out
• Flights covered by RAM
• Meals and lodging provided on-site on work days
RAM Enterprise, Inc. promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing. RAM Enterprise, Inc. is an equal opportunity employer.RAM Enterprise, Inc. is a DOT compliant company and abides by all DOT regulations.
You must have an MSHA within the last 5 years
5 or more years of experience as a Journeyman Millwright / Mechanic
MSHA certification within the last 5 years
A valid driver’s license is required upon hire and as a condition of continued employment
High School Diploma or GED equivalent
Willing to travel to Alaska
Ability to develop and sustain positive working relationships with all personnel
Possess good communication skills, i.e., written, verbal and listening
Tool Bag
Screw driver set –minimum 6 piece set
Channel locks 12”
Wire cutters
Pipe wrench 14 or 18” ( steel or aluminum)
Chisel
Hammer 24oz
ballpein (3LB sledge recommended as well)
Tape measure 25 FT
Utility or razor knife with changeable blades
Chisel scrapper
Torpedo Level
Must be skilled in use of cutting/welding equipment (torch, welder)
Ability to operate forklift, come along, air impacts, air hoist, tugger, hydraulic rams, porta powers, pressure washer
Beginning ability to analyze job and tools required
Benefits
Welding Hood
Starting at $32-38 / hr, based on experience and qualifications
$75 per diem on travel days
$200 MOB In, $200 MOB Out
Flights covered by RAM
Meals and lodging provided on-site on work days
Responsibilities
This is an hourly, non-exempt position that will report to the General Foreman
In this position, you must understand and promote Safety as your top priority
Socket set with ratchet -1/2” drive 3/8 – 1 ¼”
Allen wrench set up to 3/8”
Pry bar set 12” & 18”
Alignment punch or roll head pry bar
Adjustable wrenches 8, 10, & 12 “ (spud style is also alignment tool)
This position requires a commitment to safety as our number one priority, and a strong dedication to producing quality work
Identify and properly use, inspect and maintain personal protective equipment, including but not limited to: waterproof steeltoe boots, glasses, hardhat, gloves, face shield, goggles, leathers, earplugs
Be able and willing to work a variety of schedules, including day or night shifts
Comply with all policies and procedures in Employee Handbook
Ability to safely lift 75-100 lbs frequently, using proper lifting techniques
Understand and perform lock out/tag out procedures
Identify and use basic rigging/lifting devices (cables, chains, come along, shackles, slings, straps, electric winches)
Identify and use basic tools (hand tools: shovel, rake, pick, mill bars, wrenches, sockets, hammers, screwdrivers, pliers, measuring tape) (electric tools: impacts, drills, grinders, chop saw, band saw, winches, air compressor, generators)
Ability to drive truck/trailer combinations
Identify the tools and equipment needed for the task at hand
Perform routine maintenance and liner replacement on all crushing and milling equipment, including cone and gyratory crushers, roaster mills, ball mills, SAG mills, slurry pumps and cyclones
Ability to perform conveyor pulley replacement, repair and rebuild
Other job duties as assigned by management
While performing the duties of this job, you will be required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see
Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, gloves and other required protective equipment as required
Job description
Job Summary: We are seeking hardworking, experienced Journeyman Millwright / Mechanics with AT LEAST 5 years of experience. You must have an MSHA within the last 5 years. This position is for a week long project in Red Dog, Alaska from July 3rd - July 11th. This is an hourly, non-exempt position that will report to the General Foreman. In this position, you must understand and promote Safety as your top priority.
Requirements:
• 5 or more years of experience as a Journeyman Millwright / Mechanic
• MSHA certification within the last 5 years
• A valid driver’s license is required upon hire and as a condition of continued employment
• High School Diploma or GED equivalent
• Willing to travel to Alaska
• Ability to develop and sustain positive working relationships with all personnel
• Possess good communication skills, i.e., written, verbal and listening
• Must bring these tools:
• Tool Bag
• Screw driver set –minimum 6 piece set
• Wrench set -3/8-1 ¼”
• Socket set with ratchet -1/2” drive 3/8 – 1 ¼”
• Allen wrench set up to 3/8”
• Pry bar set 12” & 18”
• Alignment punch or roll head pry bar
• Channel locks 12”
• Wire cutters
• Adjustable wrenches 8, 10, & 12 “ (spud style is also alignment tool)
• Pipe wrench 14 or 18” ( steel or aluminum)
• Chisel
• Hammer 24oz. ballpein (3LB sledge recommended as well)
• Tape measure 25 FT.
• Utility or razor knife with changeable blades
• Chisel scrapper
• Torpedo Level
• Welding Hood
Job Duties and Responsibilities include but aren’t limited to:
• This position requires a commitment to safety as our number one priority, and a strong dedication to producing quality work
• Identify and properly use, inspect and maintain personal protective equipment, including but not limited to: waterproof steeltoe boots, glasses, hardhat, gloves, face shield, goggles, leathers, earplugs
• Be able and willing to work a variety of schedules, including day or night shifts
• Comply with all policies and procedures in Employee Handbook
• Ability to safely lift 75-100 lbs frequently, using proper lifting techniques
• Understand and perform lock out/tag out procedures
• Identify and use basic rigging/lifting devices (cables, chains, come along, shackles, slings, straps, electric winches)
• Identify and use basic tools (hand tools: shovel, rake, pick, mill bars, wrenches, sockets, hammers, screwdrivers, pliers, measuring tape) (electric tools: impacts, drills, grinders, chop saw, band saw, winches, air compressor, generators)
• Must be skilled in use of cutting/welding equipment (torch, welder)
• Ability to operate forklift, come along, air impacts, air hoist, tugger, hydraulic rams, porta powers, pressure washer
• Beginning ability to analyze job and tools required
• Ability to drive truck/trailer combinations
• Identify the tools and equipment needed for the task at hand
• Perform routine maintenance and liner replacement on all crushing and milling equipment, including cone and gyratory crushers, roaster mills, ball mills, SAG mills, slurry pumps and cyclones
• Ability to perform conveyor pulley replacement, repair and rebuild
• Other job duties as assigned by management
Criteria/Conditions:
• Work is performed in various industrial settings, including; Shop environment, mining environment, construction environment. Work sites may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, airborne particles and fumes from adhesives, solvents and paints.
• While performing the duties of this job, you will be required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see
• Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, gloves and other required protective equipment as required
Pay:
• Starting at $32-38 / hr, based on experience and qualifications
• $75 per diem on travel days
• $200 MOB In, $200 MOB Out
• Flights covered by RAM
• Meals and lodging provided on-site on work days
RAM Enterprise, Inc. promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing. RAM Enterprise, Inc. is an equal opportunity employer.RAM Enterprise, Inc. is a DOT compliant company and abides by all DOT regulations.
💡 Quick Summary
Seeking a career-building opportunity? The Journeyman Millwright|Mechanic | Alaska |MSHA Required| | Traveler position is now open for candidates interested in the Helper Jobs sector. This role in Kotzebue offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Helper Jobs is a plus.
