Job Description
Qualifications
Check product frequently with required measuring tools and record on inspection log sheet
Previous experience or on the job training
Ability to read blue prints
Communication skills:
Ability to read and interpret documents
Mathematical skills:
Ability to add, subtract, multiply and divide
Ability to use and read measuring devises
Reasoning skills:
Ability to define and solve problems
Physical demands:
Ability to lift and/or push over 50 pounds
Regularly required to hear and talk
Regularly required to sit, stand and walk
Frequent use of hands to finger, handle or feel
Ability to reach with hands and arms
Ability to climb or balance, stoop, kneel, crouch or crawl
Specific vision abilities required included close vision, distance vision, depth perception and ability to adjust focus
A bility to work in an environment where the temperature fluctuates depending on the weather outside
Responsibilities
Shift- 1st shift 6am-4:30pm Monday-Thursday
Rate: 16.50 hourly
Change out tubs at machine
Weigh tub to get correct piece count and weight
Record and return information to operator
Deliver Raw Material to Headers as required
Help clean and organize machines
Assist in the Setup and operation of headers/boltmakers as needed
Use of gages and measuring instruments are required to make sure parts conform to specification
Determine and locate required tooling to manufacture part
Put all required tools and load on a setup cart and deliver to proper machine
Verify condition of tooling
The above listed items must be done prior to the start of the setup
As needed, Sort tub/basket to remove any non-conforming parts
Assist in tearing down setup after job is complete
Follow all safety rules and procedures
Report any unsafe condition to your supervisor immediately
Learn and practice preventative maintenance on machinery and tooling to protect from damage and loss
Report any conditions requiring repair to your supervisor
Clean machine and work area daily
Keep area clean and orderly, floor around machine must be kept free of oil
Perform any other general tasks as may be directed
Job description
Machine Operator Helper Needed
Shift- 1st shift 6am-4:30pm Monday-Thursday
Rate: 16.50 hourly
Essential Job Functions:
• Change out tubs at machine. Weigh tub to get correct piece count and weight. Record and return information to operator.
• Deliver Raw Material to Headers as required.
• Help clean and organize machines.
• Assist in the Setup and operation of headers/boltmakers as needed.
• Use of gages and measuring instruments are required to make sure parts conform to specification.
• Determine and locate required tooling to manufacture part. Put all required tools and load on a setup cart and deliver to proper machine. Verify condition of tooling. The above listed items must be done prior to the start of the setup.
• Check product frequently with required measuring tools and record on inspection log sheet.
• As needed, Sort tub/basket to remove any non-conforming parts.
• Assist in tearing down setup after job is complete.
• Follow all safety rules and procedures. Report any unsafe condition to your supervisor immediately.
• Learn and practice preventative maintenance on machinery and tooling to protect from damage and loss. Report any conditions requiring repair to your supervisor.
• Clean machine and work area daily. Keep area clean and orderly, floor around machine must be kept free of oil.
• Perform any other general tasks as may be directed.
Qualifications:
• Previous experience or on the job training.
• Ability to read blue prints.
• Communication skills:
• Ability to read and interpret documents.
• Mathematical skills:
• Ability to add, subtract, multiply and divide.
• Ability to use and read measuring devises.
• Reasoning skills:
• Ability to define and solve problems.
• Physical demands:
• Ability to lift and/or push over 50 pounds.
• Regularly required to hear and talk.
• Regularly required to sit, stand and walk.
• Frequent use of hands to finger, handle or feel.
• Ability to reach with hands and arms.
• Ability to climb or balance, stoop, kneel, crouch or crawl.
• Specific vision abilities required included close vision, distance vision, depth perception and ability to adjust focus.
• A bility to work in an environment where the temperature fluctuates depending on the weather outside.
COM01+
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, ****** orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Check product frequently with required measuring tools and record on inspection log sheet
Previous experience or on the job training
Ability to read blue prints
Communication skills:
Ability to read and interpret documents
Mathematical skills:
Ability to add, subtract, multiply and divide
Ability to use and read measuring devises
Reasoning skills:
Ability to define and solve problems
Physical demands:
Ability to lift and/or push over 50 pounds
Regularly required to hear and talk
Regularly required to sit, stand and walk
Frequent use of hands to finger, handle or feel
Ability to reach with hands and arms
Ability to climb or balance, stoop, kneel, crouch or crawl
Specific vision abilities required included close vision, distance vision, depth perception and ability to adjust focus
A bility to work in an environment where the temperature fluctuates depending on the weather outside
Responsibilities
Shift- 1st shift 6am-4:30pm Monday-Thursday
Rate: 16.50 hourly
Change out tubs at machine
Weigh tub to get correct piece count and weight
Record and return information to operator
Deliver Raw Material to Headers as required
Help clean and organize machines
Assist in the Setup and operation of headers/boltmakers as needed
Use of gages and measuring instruments are required to make sure parts conform to specification
Determine and locate required tooling to manufacture part
Put all required tools and load on a setup cart and deliver to proper machine
Verify condition of tooling
The above listed items must be done prior to the start of the setup
As needed, Sort tub/basket to remove any non-conforming parts
Assist in tearing down setup after job is complete
Follow all safety rules and procedures
Report any unsafe condition to your supervisor immediately
Learn and practice preventative maintenance on machinery and tooling to protect from damage and loss
Report any conditions requiring repair to your supervisor
Clean machine and work area daily
Keep area clean and orderly, floor around machine must be kept free of oil
Perform any other general tasks as may be directed
Job description
Machine Operator Helper Needed
Shift- 1st shift 6am-4:30pm Monday-Thursday
Rate: 16.50 hourly
Essential Job Functions:
• Change out tubs at machine. Weigh tub to get correct piece count and weight. Record and return information to operator.
• Deliver Raw Material to Headers as required.
• Help clean and organize machines.
• Assist in the Setup and operation of headers/boltmakers as needed.
• Use of gages and measuring instruments are required to make sure parts conform to specification.
• Determine and locate required tooling to manufacture part. Put all required tools and load on a setup cart and deliver to proper machine. Verify condition of tooling. The above listed items must be done prior to the start of the setup.
• Check product frequently with required measuring tools and record on inspection log sheet.
• As needed, Sort tub/basket to remove any non-conforming parts.
• Assist in tearing down setup after job is complete.
• Follow all safety rules and procedures. Report any unsafe condition to your supervisor immediately.
• Learn and practice preventative maintenance on machinery and tooling to protect from damage and loss. Report any conditions requiring repair to your supervisor.
• Clean machine and work area daily. Keep area clean and orderly, floor around machine must be kept free of oil.
• Perform any other general tasks as may be directed.
Qualifications:
• Previous experience or on the job training.
• Ability to read blue prints.
• Communication skills:
• Ability to read and interpret documents.
• Mathematical skills:
• Ability to add, subtract, multiply and divide.
• Ability to use and read measuring devises.
• Reasoning skills:
• Ability to define and solve problems.
• Physical demands:
• Ability to lift and/or push over 50 pounds.
• Regularly required to hear and talk.
• Regularly required to sit, stand and walk.
• Frequent use of hands to finger, handle or feel.
• Ability to reach with hands and arms.
• Ability to climb or balance, stoop, kneel, crouch or crawl.
• Specific vision abilities required included close vision, distance vision, depth perception and ability to adjust focus.
• A bility to work in an environment where the temperature fluctuates depending on the weather outside.
COM01+
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, ****** orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
💡 Quick Summary
Seeking a career-building opportunity? The Machine Operator Helper position is now open for candidates interested in the Helper Jobs sector. This role in Euclid offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Helper Jobs is a plus.