Job Description
Full job description
Date Posted: 07/04/2026
Req ID: 44102
Faculty/Division: Faculty of Applied Science & Engineering
Department: Dept of Mechanical & Industrial Eng
Campus: St. George (Downtown Toronto)
Description:
Course number and title: MIE342H1 - Circuits with Applications to Mechanical Engineering Systems
Course description: This course presents analysis of complex circuits and application of circuit principles to design circuits for mechanical engineering systems. Discussions will center around circuits and instrumentation. In-depth discussions will be given on a number of topics: (1) Mechatronics design applications of circuit principles; (2) Network theorems, node-voltage, mesh-current method, Thévenin equivalents; (3) Operational amplifier circuits; (4) 1st and 2nd order circuits; (5) Laplace transform, frequency response; (6) Passive and active filter design (low- and high-pass filters, bandpass and bandreject filters); (7) Interface/readout circuits for mechanical engineering systems, sensors, instrumentation; (8) Inductance, transformers, DC/AC machines; (9) Digital circuit and data sampling introduction.
Estimated course enrolment (approximately): 240
Estimated TA support: TBD
Class schedule: TBD
Sessional dates of appointment: September to December 2026
Salary: $15,000 (per half course inclusive of vacation pay) Please note that should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Minimum qualifications: Applicants should have a strong record of presenting lectures or acting as a teaching assistant. Applicants must be able to demonstrate considerable depth of knowledge and experience in the subject area. All applicants should have excellent communication skills - both oral and written. Professional Engineer (P.Eng.) or Limited License (LEL) is strongly preferred. Engineering Intern (EIT) is also acceptable.
Description of duties: Preparation of lectures and course materials; delivery of lectures; supervision of Teaching Assistants; setting and marking of tests and exams; evaluation of final grades; contact with students.
Application instructions: Please submit a Unit 3 Sessional Instructor Application Form, Resume and Teaching Dossier merged into a single PDF file to the MIE Undergraduate Office by email at ugservices@mie.utoronto.ca no later than July 15, 2026 at 11:59pm (eastern time). The Course Instructor Application Form can be found on the MIE Careers page here: https://www.mie.utoronto.ca/faculty-staff/careers/. Applicants must include full contact information of their supervisor, plus two U of T employees (faculty of staff) who can testify to the teaching skills of the applicant. If during the application and/or selection process you require accommodation due to a disability, please contact ugservices@mie.utoronto.ca. The appointment will be made at the earliest possible time before the commencement of classes by the Associate Chair (Undergraduate) of the Department of Mechanical and Industrial Engineering. No other offers or notices of the outcome of applications are authorized by the Department. Final availability of the position is contingent upon final course determination, enrolment, budgetary considerations, and the final determination of assignments flowing from Article 14:03 of the Collective Agreement.
Closing Date: 07/15/2026, 11:59PM EDT
This job is posted in accordance with the CUPE 3902 Unit 3 Collective Agreement.
It is understood that some announcements of vacancies are tentative, pending final course determinations and enrolment. Should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Preference in hiring is given to qualified individuals advanced to the rank of Sessional Lecturer II or Sessional Lecturer III in accordance with Article 14:12 of the CUPE 3902 Unit 3 collective agreement.
Please note: Undergraduate or graduate students and postdoctoral fellows of the University of Toronto are covered by the CUPE 3902 Unit 1 collective agreement rather than the Unit 3 collective agreement, and should not apply for positions posted under the Unit 3 collective agreement.
Date Posted: 07/04/2026
Req ID: 44102
Faculty/Division: Faculty of Applied Science & Engineering
Department: Dept of Mechanical & Industrial Eng
Campus: St. George (Downtown Toronto)
Description:
Course number and title: MIE342H1 - Circuits with Applications to Mechanical Engineering Systems
Course description: This course presents analysis of complex circuits and application of circuit principles to design circuits for mechanical engineering systems. Discussions will center around circuits and instrumentation. In-depth discussions will be given on a number of topics: (1) Mechatronics design applications of circuit principles; (2) Network theorems, node-voltage, mesh-current method, Thévenin equivalents; (3) Operational amplifier circuits; (4) 1st and 2nd order circuits; (5) Laplace transform, frequency response; (6) Passive and active filter design (low- and high-pass filters, bandpass and bandreject filters); (7) Interface/readout circuits for mechanical engineering systems, sensors, instrumentation; (8) Inductance, transformers, DC/AC machines; (9) Digital circuit and data sampling introduction.
Estimated course enrolment (approximately): 240
Estimated TA support: TBD
Class schedule: TBD
Sessional dates of appointment: September to December 2026
Salary: $15,000 (per half course inclusive of vacation pay) Please note that should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Minimum qualifications: Applicants should have a strong record of presenting lectures or acting as a teaching assistant. Applicants must be able to demonstrate considerable depth of knowledge and experience in the subject area. All applicants should have excellent communication skills - both oral and written. Professional Engineer (P.Eng.) or Limited License (LEL) is strongly preferred. Engineering Intern (EIT) is also acceptable.
Description of duties: Preparation of lectures and course materials; delivery of lectures; supervision of Teaching Assistants; setting and marking of tests and exams; evaluation of final grades; contact with students.
Application instructions: Please submit a Unit 3 Sessional Instructor Application Form, Resume and Teaching Dossier merged into a single PDF file to the MIE Undergraduate Office by email at ugservices@mie.utoronto.ca no later than July 15, 2026 at 11:59pm (eastern time). The Course Instructor Application Form can be found on the MIE Careers page here: https://www.mie.utoronto.ca/faculty-staff/careers/. Applicants must include full contact information of their supervisor, plus two U of T employees (faculty of staff) who can testify to the teaching skills of the applicant. If during the application and/or selection process you require accommodation due to a disability, please contact ugservices@mie.utoronto.ca. The appointment will be made at the earliest possible time before the commencement of classes by the Associate Chair (Undergraduate) of the Department of Mechanical and Industrial Engineering. No other offers or notices of the outcome of applications are authorized by the Department. Final availability of the position is contingent upon final course determination, enrolment, budgetary considerations, and the final determination of assignments flowing from Article 14:03 of the Collective Agreement.
Closing Date: 07/15/2026, 11:59PM EDT
This job is posted in accordance with the CUPE 3902 Unit 3 Collective Agreement.
It is understood that some announcements of vacancies are tentative, pending final course determinations and enrolment. Should rates stipulated in the collective agreement vary from rates stated in this posting, the rates stated in the collective agreement shall prevail.
Preference in hiring is given to qualified individuals advanced to the rank of Sessional Lecturer II or Sessional Lecturer III in accordance with Article 14:12 of the CUPE 3902 Unit 3 collective agreement.
Please note: Undergraduate or graduate students and postdoctoral fellows of the University of Toronto are covered by the CUPE 3902 Unit 1 collective agreement rather than the Unit 3 collective agreement, and should not apply for positions posted under the Unit 3 collective agreement.
💡 Quick Summary
Seeking a career-building opportunity? The Sessional Lecturer - MIE342H1 - Circuits with Applications to Mechanical Engineering System position is now open for candidates interested in the Teacher Jobs sector. This role in Toronto offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in Teacher Jobs is a plus.