Job Description
Ubiety is the creator of HomeAware, an AI-powered mobile application that delivers real-time presence insights during alarm events and beyond, so you always know who’s home when it matters most. Our platform provides meaningful, contextual notifications that prioritize awareness over reaction, helping families feel safer without the burden of unnecessary emergency calls or intrusive surveillance.
With the introduction of HomeAware, Ubiety is redefining the home security experience. By combining cutting-edge AI with seamless smart home integration, we ensure our users are better informed, more in control, and able to protect what matters most.
We are seeking a highly driven Embedded Software Engineer with a strong firmware focus to help power and scale this growing device platform. You will play a critical role in building and maintaining the low-level firmware, operating systems, and device management infrastructure that supports an entire fleet of connected smart home security devices. You will own and evolve the lowest levels of Ubiety’s device ecosystem, ensuring that every connected device can boot, update, recover, communicate, and operate reliably in the field. If you thrive in fast-moving environments, enjoy deep technical ownership, and are passionate about building systems that run reliably at scale, this role is for you.
Responsibilities
Design, build, and maintain firmware, kernel modules, and system-level software for Ubiety’s connected smart home devices.
Own the low-level device lifecycle: secure boot, provisioning, OTA firmware/software updates, factory reset, recovery, and health monitoring.
Perform board bring-up and validation on new hardware prototypes and production devices.
Develop and test firmware on development boards for deployment to prototype and production hardware.
Build monitoring and recovery systems that detect hardware/software issues and autonomously recover from failure states.
Troubleshoot and debug issues reported from devices deployed in the field (connectivity, power, module failures, etc.).
Collaborate with hardware engineers on schematics, board-level design decisions, and system architecture.
Develop and optimize on-device code that supports RF detection, sensing, and device discovery.
Participate in hardware roadmap planning for future device generations.
Maintain and improve firmware codebases through documentation, refactoring, and performance optimization.
Mentor teammates and provide technical guidance on embedded and firmware best practices.
Own technical relationships with third-party hardware design and manufacturing partners.
Debug complex system issues, prioritize effectively, and deliver with high efficiency.
Qualifications
Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field (or demonstrable equivalent professional experience and work products)
3–5+ years of professional experience in embedded systems or firmware development
Strong proficiency in C/C++ for resource-constrained embedded targets
Hands-on, system-level experience designing, implementing, and debugging embedded systems (from low-level drivers to application code)
Demonstrated experience prototyping and developing embedded systems
Working knowledge of embedded Linux, including kernel configuration, driver integration, and board support (experience with Yocto or similar build systems is a plus)
Familiarity with RTOS concepts and application development (tasks, scheduling, synchronization, and memory management)
Strong communication skills, work ethic, and a passion for continuous learning
Nice-to-Have Experience
Familiarity with modern C/C++ build and dependency tooling (e.g., CMake, Autotools, Conan, or similar)
Experience implementing and debugging common embedded communication interfaces and protocols (e.g., UART, SPI, I²C, CAN, etc.)
FreeRTOS application developmentDevelopment on Espressif platforms (e.g., ESP32, ESP-IDF)
Experience programming and integrating FPGAs into embedded systems
Direct experience with hardware development: Digital circuit designPCB layout and PCBABoard bring-up and validation
Experience working with major communication protocols and standards:Bluetooth / BLEWiFiCellular (LTE, 5G, etc.)
What we can offer you
The opportunity to scale a first of its kind AI enabled security solution at a rapidly growing startup
A small, mission-driven team that cares about each other, and cares about leveling everyone up together!
A highly collaborative environment with an extreme level of transparency and visibility at all levels of the company
Competitive salary with equity ownership of a fast-growing company
Subsidized health care coverage
Flexible schedule
Unlimited PTO policy - Work hard, deliver on your goals, and then take the time to play hard, disconnect, and recharge.
With the introduction of HomeAware, Ubiety is redefining the home security experience. By combining cutting-edge AI with seamless smart home integration, we ensure our users are better informed, more in control, and able to protect what matters most.
We are seeking a highly driven Embedded Software Engineer with a strong firmware focus to help power and scale this growing device platform. You will play a critical role in building and maintaining the low-level firmware, operating systems, and device management infrastructure that supports an entire fleet of connected smart home security devices. You will own and evolve the lowest levels of Ubiety’s device ecosystem, ensuring that every connected device can boot, update, recover, communicate, and operate reliably in the field. If you thrive in fast-moving environments, enjoy deep technical ownership, and are passionate about building systems that run reliably at scale, this role is for you.
Responsibilities
Design, build, and maintain firmware, kernel modules, and system-level software for Ubiety’s connected smart home devices.
Own the low-level device lifecycle: secure boot, provisioning, OTA firmware/software updates, factory reset, recovery, and health monitoring.
Perform board bring-up and validation on new hardware prototypes and production devices.
Develop and test firmware on development boards for deployment to prototype and production hardware.
Build monitoring and recovery systems that detect hardware/software issues and autonomously recover from failure states.
Troubleshoot and debug issues reported from devices deployed in the field (connectivity, power, module failures, etc.).
Collaborate with hardware engineers on schematics, board-level design decisions, and system architecture.
Develop and optimize on-device code that supports RF detection, sensing, and device discovery.
Participate in hardware roadmap planning for future device generations.
Maintain and improve firmware codebases through documentation, refactoring, and performance optimization.
Mentor teammates and provide technical guidance on embedded and firmware best practices.
Own technical relationships with third-party hardware design and manufacturing partners.
Debug complex system issues, prioritize effectively, and deliver with high efficiency.
Qualifications
Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field (or demonstrable equivalent professional experience and work products)
3–5+ years of professional experience in embedded systems or firmware development
Strong proficiency in C/C++ for resource-constrained embedded targets
Hands-on, system-level experience designing, implementing, and debugging embedded systems (from low-level drivers to application code)
Demonstrated experience prototyping and developing embedded systems
Working knowledge of embedded Linux, including kernel configuration, driver integration, and board support (experience with Yocto or similar build systems is a plus)
Familiarity with RTOS concepts and application development (tasks, scheduling, synchronization, and memory management)
Strong communication skills, work ethic, and a passion for continuous learning
Nice-to-Have Experience
Familiarity with modern C/C++ build and dependency tooling (e.g., CMake, Autotools, Conan, or similar)
Experience implementing and debugging common embedded communication interfaces and protocols (e.g., UART, SPI, I²C, CAN, etc.)
FreeRTOS application developmentDevelopment on Espressif platforms (e.g., ESP32, ESP-IDF)
Experience programming and integrating FPGAs into embedded systems
Direct experience with hardware development: Digital circuit designPCB layout and PCBABoard bring-up and validation
Experience working with major communication protocols and standards:Bluetooth / BLEWiFiCellular (LTE, 5G, etc.)
What we can offer you
The opportunity to scale a first of its kind AI enabled security solution at a rapidly growing startup
A small, mission-driven team that cares about each other, and cares about leveling everyone up together!
A highly collaborative environment with an extreme level of transparency and visibility at all levels of the company
Competitive salary with equity ownership of a fast-growing company
Subsidized health care coverage
Flexible schedule
Unlimited PTO policy - Work hard, deliver on your goals, and then take the time to play hard, disconnect, and recharge.
💡 Quick Summary
Seeking a career-building opportunity? The Embedded Software Engineer- post position is now open for candidates interested in the IT Engineer & Developer Jobs sector. This role in Chicago offers a professional environment and growth potential.
Requirement Snapshot: Candidates should possess basic communication skills, a proactive attitude, and the ability to work in a team. Experience in IT Engineer & Developer Jobs is a plus.
